Chat with us, powered by LiveChat
  • View all Rainguard Brands
  • Cool Coat™ Roof Coating Acrylic Thermal Defense Sealer

    • Reflects Heat From Roof Surfaces
    • Reduces Surface Temperature up to 30%
    • Protects Various Roofing Materials
    • Eco-friendly, low VOCs, & made in USA
    COOL COAT™ Roof Coating 3 Yr Material Warranty

    Select sizes & view technical information below

    Product Overview  |  Technical Data
    Coverage Rates  |  Application Guidelines

    Item #: SP-2019
    1 Gallon RTU
    White / Tintable


    Item #: SP-2020
    5 Gallons RTU
    White / Tintable


    Cool Coat ™ Roof Coating is a white / tintable acrylic elastomeric coating that insulates roofing materials such as metal, wood, roof shingles, and more from moisture and reduces surface heat. Cool Coat ™ flexes when surfaces expand and contract, preventing ruptures and cracks that result from temperature changes.

    View Technical Documents


    • Meets Title 24 requirements
    • 200% elongation
    • Full range of colors
    • Low V.O.C/Low Odor
    • Great for high mold & mildew environments
    • High UV resistance
    • Excellent adhesion when used as a system
    • May be applied at 35 degrees and up

    Coverage Rates (Theoretical)

    Substrate Sq Ft / Gallon
    Porous Surfaces 100
    Non-Porous Surfaces 70
    Painted Surfaces 70

    How to Use

    1) Prepare Surface

    To apply, surface moisture content must be less than 25% as measured with an electronic moisture meter. Surfaces must be free of dirt, grime, efflorescence, lime run, construction debris, form oils and release agents, chalked materials, loose and peeling paint, mold, mildew, etc. All cracks should be pointed or caulked.

    Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

    2) Prepare Product

    Stir Cool Coat™ thoroughly before application. If solution becomes too thick to spray, add 1 quart of water per 5 gallons of solution.

    3) Apply Cool Coat™ Roof Coating

    SPRAY: Angle spray tip above surface apply Cool Coat™ Roof Coating using a crosshatch spray pattern. Angle the spray tip above surface to allow coating to build proper thickness. Back-roll materials into surface to create a uniform and pinhole free surface film.
    ROLLER: Apply 2 coats of Cool Coat™ to surfaces at the recommend coverage rate. Wait approximately 4 hours before applying a second coat.

    4) Let Dry

    Surface will be dry to the touch in 2 hours. Full chemical cure takes 3-4 weeks.


    Technical Documents



    Additional information

    Weight 9.34 lbs
    Dimensions N/A

    You may also like…