VandlGuard® Five Anti-Graffiti Coating is part of a two step non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. When used in conjunction with VandlGuard® Finish, the coating can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® Five is eligible for a 5 year material & labor warranty (see TDS for details).
Highlights
- Sustains repeated graffiti removals for 5 years
- Does not alter surface appearance or yellow over time
- Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
- Easy application – no mixing required
- Inhibits mildew, mold, fungus, & bacteria growth
- Time efficient – can be applied in one day
Coverage Rates (Theoretical)
Substrate | Sq Ft / Gallon | # Of Coats* |
Precision/Split Face Block | 200 | 1 |
Ground Face Block | 200 | 1 |
Scored/Fluted Block | 180 | 1 |
Sand Blasted Block | 180 | 1 |
Slump/Adobe Block | 200 | 1 |
Heavy Textured Stucco | 200 | 1 |
Brick | 250 | 1 |
Unpainted Wood | 200 | 1 |
Porous Tile | 200 | 1 |
Fine/Medium Textured Stucco | 250 | 1 |
Cast/Pre-Cast/Tilt-Up Concrete | 250 | 1 |
Sand Blasted Concrete | 225 | 1 |
*DOES NOT INCLUDE NUMBER OF COATS OF VANDLGUARD FINISH COAT. This is just the number of coats of VandlGuard Five.
How to Use
1) Prepare Surface
To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.
Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.
PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard®FIVE.
3) Apply VandlGuard® Five
Apply VandlGuard®FIVE with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, let dry for 1-2 hours before applying VandlGuard® Finish Coat.
4) Apply VandlGuard® Finish Coat
Apply VandlGuard® Finish Coat with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, let dry for 1-2 hours before applying additional coats. Entire system fully cures in 3-4 days.
Graffiti Removal
Prior to graffiti removal, graffiti coating must cure for 3-4 days depending on weather conditions. Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.
Technical Documents
TECHNICAL DATA SHEET | SAFETY DATA SHEET | ARCHITECTURAL SPECIFICATIONS | LARR APPROVAL REPORT | FIELD INSPECTION REPORT | LEED CREDITS
WARRANTY PRE-REGISTRATION (DIGITAL) | WARRANTY PRE-REGISTRATION (TO PRINT)